Hospital Beds

Model No. LCS-1001

  1. Bed base, Frame and leg are made of cold-rolled steel plate and tube, coated by electro static spray after twice phospatization.
  2. The quality attains national standard, luxurious plastic bottom cover.
  3. Head and foot boards.
  4. Side rails are made of imported P.P. Materials.
  5. It is equipped with vertical traveling motor which is quite noise less and able to support over 250 kgs.
  6. Side-rail control panels make patient operate much easier (with controller for nurse and CPR).
  7. Centrally controlled silent casters of high strength and high wear.
  8. Resist and enable to move the bed flexible, lightly and conveniently.
  9. It is equipped with four PP side rails (which can be positioned upward and downward) infusion stand and drainage hook.
  10. S.S. Telescopic I.V. rod with four location (Positions obtained)
  11. Backrest elevation
  12. Knee rest elevation
  13. Hi-Low
  14. Trendlenburg/Reverse Trendlenburg
  15. CPR for zero positioning of bed

Model No. LCS-1002

  1. Four pieces individual side rails ABS moulded of with degree indication
  2. Heavy ABC head and foot board with buffers and I.V. arrangement
  3. Frame work made of M.S. Tubes
  4. Bed mounted on 5 Inch central locking casters
  5. Top made of oval perforated design
  6. S.S Telescopic I.V rod with four locations
  7. Bed mounted on 5 central locking casters, durable and quite sitting position adjustable
  8. Finish pre-treated and epoxy power coated
  9. Advanced linear actuator system (Positions obtained by hand remote and hurse control system)
  10. Back Rest, knee rest elevation Hi-Low Trendlenburg
  11. Reverse trendlenburg
  12. CPR f or zero positioning of bed

Model No. LCS-1003

  1. Frame made of Strong Rectangular CRCA Pipe.
  2. Uniformly Perforated Four Sectional ABS Sheet Top
  3. Back-Rest, knee-Rest, Trendlenburg/Reverse Trendlenburg and Hi-Low Position Obtained by Electric Actuator.
  4. ABS Molded Head & Foot Panels.
  5. ABS Tuck Away Side Safety Railing.
  6. Bed Mounted on 5 inch Special Castors, two with Brakes.
  7. One S.S.I.V. Rod.
  8. Overall Size 220L 100W 60-80H cms.
  9. Pre-treated and Epoxy Powder Coated.

Model No. LCS-1004

  1. Frame made of Strong Rectangular CRCA Pipe.
  2. Uniformly Perforated Four Sectional CRCA Sheet Top
  3. Back-rest, knee-Rest, Trendlenburg/Reverse Trendlenburg and Hi-Low Position Obtained by Electric Actuator.
  4. ABS Molded Head & Foot Panels.
  5. ABS Tuck away Side Safety Railing.
  6. Bed Mounted on 5 inch Special Castors, two with Brakes.
  7. One S.S.I.V. Rod.
  8. Overall Size 220L 100W 60-80H cms.
  9. Pre-treated and Epoxy Powder Coated.

Model No. LCS-1005

  1. Frame made of Strong Rectangular CRCA Pipe.
  2. Uniformly Perforated Four Sectional CRCA Sheet Top
  3. Back-rest, knee-Rest, Trendlenburg/Reverse Trendlenburg and Hi-Low Position Obtained by Electric Actuator.
  4. S.S Molded Head & Foot Panels.
  5. Aluminum Collapsible Side Safety Railing.
  6. Bed Mounted on 5 inch Castors, two with Brakes.
  7. One S.S.I.V. Rod.
  8. Overall Size 220L 100W 60-80H cms.
  9. Pre-treated and Epoxy Powder Coated.

Model No. LCS-1006

  1. Frame made of Strong Rectangular CRCA Pipe.
  2. Uniformly Perforated Four Sectional CRCA Sheet Top
  3. Back-rest, knee-Rest Obtained by Crank Mechanism.
  4. ABS Molded Head & Foot Panels.
  5. ABS Tuck Away Side Safety Railing.
  6. Overall Size 220L 100W 60-80H cms.
  7. Pre-treated and Epoxy Powder Coated.
  8. Bed Mounted on 5 inch Special Castors, two with Brakes.

Model No. LCS-1007

  1. Frame made of Strong Rectangular CRCA Pipe.
  2. Uniformly Perforated Four Sectional CRCA Sheet Top
  3. Back-rest, knee-Rest Obtained by Crank Mechanism.
  4. ABS Molded Head & Foot Panels.
  5. Aluminum Collapsible Side Safety Railing.
  6. Overall Size 220L 100W 60-80H cms.
  7. Pre-treated and Epoxy Powder Coated.
  8. Bed Mounted on 5 inch Special Castors, two with Brakes.